|
|
|
|
|
|
|
Product Information
- Model：NLS-EM3000
- Product Category：2D Barcode Scanning Engine
- Data type：1D/2D
- Reading Mode ：CMOS
- Interface：RS232/USB
- Wireless：
|
|
Designed for OEM application, easily adopted into all kinds of equipments where need the 1D/2D barcode scanning application.
|
|
◆ Highly Integrated
Compact and highly integrated design, image capture device with decoder on the same board. Small form factor features an easy installation and variety of usages.
◆ Advance Technology
Thanks to the core-technology .jpg) . Independent designed and manufactured by Newland Auto-ID. Technology includes the optical, CMOS, digitizer, decoder, image processing & embedded systems. Supports all global standard 1D barcode symbologies as well as major 2D codes (QR Code, DataMatrix, PDF417, Aztec, Maxicode, Chinese-Sensible Code & LP Code) Reading performance reaches global standard. By using accessories provided, scan all kinds of barcodes defined by customers.
◆ Intelligent Focus
Advanced optical focusing system which senses the ambient environment and adjusts the optical automatically for a quick reading response.
|
|
Performance
|
|
Image Sensor
|
CMOS
|
|
Resoluing
|
752 * 480
|
|
Interface
|
RS232 / HID-KBW / UDP / USB COM Port Emulation / HID-POS
|
|
Symbologies
|
2D
|
PDF417, QR Code(Model 1/2), DataMatrix(ECC200, ECC000, 050, 080,
100,140), Aztec, Chinese-Sensible Code, Maxicode, LP Code, etc.
|
|
1D
|
Code128, EAN-13, EAN-8, Code39, UPC-A, UPC-E, Codabar, China post 25, Interleaved 2 of 5, ISBN/ISSN, Code 93, etc.
|
|
Precision
|
≥ 3mil
|
|
Light Source
|
LED(622 nm - 628 nm)
|
|
Light Intensity
|
330 LUX (130 mm )
|
|
Depth of Scan Field
|
20 mm ~ 500 mm
|
|
Print Contrast Signal
|
≥ 25%
|
|
Roll
|
360°
|
|
Pitch
|
45°
|
|
Yaw
|
45°
|
|
Illumination
|
0 ~ 100,000 LUX
|
|
Electricals
|
|
Power Consumption
|
1.7 W
|
|
Voltage
|
DC 3.3 V
|
|
Current
|
Max
|
350 mA
|
|
Working
|
300 mA
|
|
Idle
|
50 mA
|
|
Weight
|
18 g
|
|
Enviroment
|
|
Operate Temperature
|
-5℃ - +45℃
|
|
Storage Temperature
|
-40℃ - +60℃
|
|
Humidity
|
5% - 95%(non-condensing)
|
|
Programming Software
|
Quick Set, Programming Guide, uTools Lite
|
|
Certification
|
FCC Part15 Class B, CE EMC Class B
|
|
Barcode
|
Density (mil)
|
Near (mm)
|
Far (mm)
|
|
Code 39
|
5
|
55
|
115
|
|
Code 39
|
10
|
30
|
215
|
|
PDF417
|
5
|
50
|
105
|
|
PDF417
|
10
|
30
|
215
|
|
QR Code
|
10
|
25
|
135
|
|
QR Code
|
15
|
25
|
210
|
|
Data Matrix
|
10
|
25
|
150
|
|
Data Matrix
|
15
|
20
|
220
|
0.How to confirm the types of your equipment, X+? X? or other type?
A.X+ type(EM2027 series, last number of serial number is "X+"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW，RS232.
X type(EM2100 series,last number of serial Number is "X"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW，RS232.
1.How to confirm whether the driver has been installed successfully?
A.First, confirm the equipment had connected to PC and the equipment operating normally. Open: Control Panel> Device Manager> Universal Serial Bus Controller,
If there is "Newland USB Datapipe to series Device" said connection is "USB Com Port Emuation"--COM.
If there is "Newland USB DataPipe Device" said connection is "USB-DataPipe".
If there is yellow "!" before the equipment, delete the equipment, and then scan detection hardware changes, Wait for the system to automatically install the new drivers finished.
2.Whether it is necessary upgrade the driver of USB-Datapipe from the old version to the new v1.2 USB driver (vcomctrl v1.2.exe)?
A.The new driver support USB Interface of X+ : USB-DataPipe/ USB Com Port Emuation/HID-KBW. If the users of X series, had developed their own application through the USB SDK, recommendations are not updated to the latest driver.
3.If you have installed v1.2 USB driver, how to connect by USB-Datapipe?
A.If your equipment is X+ series, read the set code of USB-Datapipe.(You can download The Manual of Settings Code free from this website.) If your equipment is X series, first you should close USB to COM serve, open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, Startup Type: Manual.
4.After installed the new driver, how to find out the COM port Corresponding to the USB Com Port Emuation?
A.Open Start> all the procedures>vcomctrl>vcomctrl, you can find the number of the COM port there.
5.Why QuickSet can not connect the equipment through USB after installed v1.2 driver?
A.Confirm FAQ-1 driver has installed correctly --> Check out the number of COM port of FAQ-4 --> Confirmed equipment has been launched. Open the Quickset, select the right COM port,manual detection. If the detection failed, you can choose one of the following ways to solve the problem:
i.Check out whether swich to HID-KBW and have set Non-HID-KBW when read The Manual of Settings Code. Change and connect it again.
ii.If it connect through COM before, open "File>PC comm... > USB>OK" in Quickset, try whether it work.
iii.Close Quickset, close connection then open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, and then start it again.
Connect the equipment, open Quickset, try connection through COM.
iv.Close Quickset, close connection. Reboot the equipment, open Quickset, connect it again.
| 名称 | 大小 | 类别 |
| 1 |
|
645 KB |
Development kit |
| 2 |
|
|
Driver |
| 3 |
|
2 MB |
Software |
| 4 |
|
380 KB |
Driver |
| 名称 | 大小 | 类别 |
| 1 |
|
|
Brochures |
| 2 |
|
1 MB |
Brochures |
|
|
|
