| Overview |
| A mobile 2D barcode scanner mainly focusing on the 2D symbologies on the screen of mobile phone. Can be used as a validation device in the mobile ticketing application. |
| Features |
| High Acceptancy |
| Well-designed on the light source to meets all kinds of high bright, low resolution mobile LED/LCD screen barcodes(Mainly focusing on 2D) scanning. The acceptancy on the anti-reflection and high density barcode scanning also reaches global standard. Covers most of the mobile phone screens from major brands for 2D symbologies scanning. |
| Advance Technology |
Thanks to the core-technology . Independent designed and manufactured by Newland Auto-ID.
Technology includes the optical, CMOS, digitizer, decoder, image processing & embedded systems. Supports all global standard 1D barcode symbologies as well as major 2D codes (QR Code, DataMatrix, PDF417, Aztec, Maxicode, Chinese-Sensible Code & LP Code) Reading performance reaches global standard. By using accessories provided, scan all kinds of barcodes defined by customers. |
|
| Specification |
Performance |
Image Sensor |
CMOS |
Resolution |
640 * 480 |
Interface |
RS232 / HID-KBW / UDP / USB COM Port Emulation / HID-POS |
Symbologies
|
2D
|
PDF417, QR Code(Model 1/2), DataMatrix(ECC200, ECC000, 050, 080,
100,140), Aztec, Chinese-Sensible Code, Maxicode, LP Code, etc. |
1D
|
Code128, EAN-13, EAN-8, Code39, UPC-A, UPC-E, Codabar, China post 25, Interleaved 2 of 5, ISBN/ISSN, Code 93, etc. |
Precision
|
≥ 3mil |
Light Source
|
LED(622 nm - 628 nm) |
Light Intensity
|
290 LUX (130 mm ) |
Depth of Scan Field
|
0 mm ~ 450 mm |
Print Contrast Signal
|
≥ 25% |
Roll
|
360° |
Pitch |
45° |
Yaw |
45° |
Illumination
|
0 ~ 100,000 LUX |
Electricals
|
Power Consumption
|
2 W |
Voltage
|
DC 5 V |
Current
|
Max
|
400 mA |
Working
|
300 mA |
Idle
|
1 mA |
Weight
|
250 g |
Enviroment
|
Operate Temperature
|
-5℃ - +45℃ |
Storage Temperature
|
-40℃ - +60℃ |
Humidity
|
5% - 95%(non-condensing) |
Programming Software
|
Quick Set, Programming Guide, uTools Lite |
Certification |
FCC Part15 Class B, CE EMC Class B |
|
| Decode Distances |
Barcode |
Density (mil) |
Near (mm) |
Far (mm) |
Code 39 |
5 |
0 |
15 |
Code 39 |
10 |
0 |
25 |
PDF417 |
5 |
0 |
20 |
PDF417 |
10 |
0 |
30 |
QR Code |
10 |
0 |
25 |
QR Code |
15 |
0 |
36 |
Data Matrix |
10 |
0 |
25 |
Data Matrix |
15 |
0 |
40 |
|
| |
Document Name |
Size |
Document Type |
| 1 |
FM200 Datasheet |
|
Datesheet |
| 2 |
FM200 User Manual |
|
User Manual |
| 3 |
FM210X User's Manual |
764 KB |
User Manual |
| 4 |
Serial Programming Commands manual |
274KB |
User Guide |
| 5 |
Setting Code User Manual |
432KB |
User Guide |
| 6 |
Quickset User Manual |
721 KB |
Manual |
| 1. How to confirm the types of your equipment, X+? X? or other type? |
A. X+ type(EM2027 series, last number of serial number is "X+"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW，RS232.
X type(EM2100 series,last number of serial Number is "X"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW，RS232. |
| 2. How to confirm whether the driver has been installed successfully? |
A. First, confirm the equipment had connected to PC and the equipment operating normally.
Open: Control Panel> Device Manager> Universal Serial Bus Controller,
If there is "Newland USB Datapipe to series Device" said connection is "USB Com Port Emuation"--COM.
If there is "Newland USB DataPipe Device" said connection is "USB-DataPipe".
If there is yellow "!" before the equipment, delete the equipment, and then scan detection hardware changes, Wait for the system to automatically install the new drivers finished. |
| 3. Whether it is necessary upgrade the driver of USB-Datapipe from the old version to the new v1.2 USB driver (vcomctrl v1.2.exe)? |
| A. The new driver support USB Interface of X+ : USB-DataPipe/ USB Com Port Emuation/HID-KBW. If the users of X series, had developed their own application through the USB SDK, recommendations are not updated to the latest driver. |
| 4. If you have installed v1.2 USB driver, how to connect by USB-Datapipe? |
| A. If your equipment is X+ series, read the set code of USB-Datapipe.(You can download The Manual of Settings Code free from this website.) If your equipment is X series, first you should close USB to COM serve, open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, Startup Type: Manual. |
| 5. After installed the new driver, how to find out the COM port corresponding to the USB Com Port Emuation? |
| A. Open Start> all the procedures>vcomctrl>vcomctrl, you can find the number of the COM port there. |
| 6. Why QuickSet can not connect the equipment through USB after installed v1.2 driver? |
A. Confirm FAQ-1 driver has installed correctly --> Check out the number of COM port of FAQ-4 --> Confirmed equipment has been launched. Open the Quickset, select the right COM port,manual detection. If the detection failed, you can choose one of the following ways to solve the problem:
i.Check out whether swich to HID-KBW and have set Non-HID-KBW when read The Manual of Settings Code. Change and connect it again.
ii. If it connect through COM before, open "File>PC comm... > USB>OK" in Quickset, try whether it work.
iii. Close Quickset, close connection then open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, and then start it again.
Connect the equipment, open Quickset, try connection through COM.
iv. Close Quickset, close connection. Reboot the equipment, open Quickset, connect it again. |
| |
Software Name |
Size |
Software Type |
| 1 |
QuickSet2.06 build0617 |
2MB |
Software |
| 2 |
USB Driver for X,X+ Series |
593KB |
Drivers |
None
|
