| Overview |
| A general-purpose hand-held scanner for 1D barcode scanning, suitable for most barcode scanning needs. |
| Features |
| Durable and Easy to Operate |
| This is a well-designed hand-held CCD scanner. Aside from the priciple of excellence mechanical design, it also installs with many user-friendly operations. |
| Advance Technology |
Thanks to the core-technology  . Independent designed and manufactured by Newland Auto-ID.
technology includes the optical, CMOS, digitizer, decoder, image processing & embedded systems. Supports all global standard 1D barcode symbologies Reading performance reaches global standard. By using accessories provided, scan all kinds of barcodes defined by customers. |
|
| Specification |
Performance |
Image Sensor |
Linear CCD |
Interface |
RS232/USB-HID/KBW |
Symbologies |
Code128, EAN-13, EAN-8, Code39,UPC-A, UPC-E, Codabar, China post 25, Interleaved 2 of 5, ISBN/ISSN, Code 93 etc. |
Precision |
≥ 4mil |
Light Source |
Visible LED Diode 630 nm ± 10 nm |
Depth of Scan Field |
40 mm - 300mm |
Print Contrast Signal |
≥ 30% |
Roll |
45° |
Pitch |
30° |
Yaw |
45° |
Mechanical/ Electrical |
Power Consumption |
0.7W（Max） |
Voltage |
DC 5.0V |
Current |
| Peak |
150mA |
| Operating |
120mA |
| idle |
45mA |
|
Weight |
105g |
Environment |
Operate Temperature |
-20℃to +60℃ |
Storage Temperature |
-40℃to +85℃ |
Humidity |
5% - 95% ( non-condensing ) |
Authentication |
FCC Part15 Class B, CE EMC Class B |
|
| Decode Distances |
Barcode |
Density (mil) |
Near (mm) |
Far (mm) |
EAN-8 |
10 |
55 |
220 |
EAN-8 |
15 |
20 |
340 |
Code39 |
5 |
80 |
140 |
Code39 |
10 |
40 |
210 |
Code39 |
12 |
40 |
330 |
Code39 |
16 |
45 |
450 |
|
| 1. How to confirm the types of your equipment, X+? X? or other type? |
A. X+ type(EM2027 series, last number of serial number is "X+"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW，RS232.
X type(EM2100 series,last number of serial Number is "X"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW，RS232. |
| 2. How to confirm whether the driver has been installed successfully? |
A. First, confirm the equipment had connected to PC and the equipment operating normally.
Open: Control Panel> Device Manager> Universal Serial Bus Controller,
If there is "Newland USB Datapipe to series Device" said connection is "USB Com Port Emuation"--COM.
If there is "Newland USB DataPipe Device" said connection is "USB-DataPipe".
If there is yellow "!" before the equipment, delete the equipment, and then scan detection hardware changes, Wait for the system to automatically install the new drivers finished. |
| 3. Whether it is necessary upgrade the driver of USB-Datapipe from the old version to the new v1.2 USB driver (vcomctrl v1.2.exe)? |
| A. The new driver support USB Interface of X+ : USB-DataPipe/ USB Com Port Emuation/HID-KBW. If the users of X series, had developed their own application through the USB SDK, recommendations are not updated to the latest driver. |
| 4. If you have installed v1.2 USB driver, how to connect by USB-Datapipe? |
| A. If your equipment is X+ series, read the set code of USB-Datapipe.(You can download The Manual of Settings Code free from this website.) If your equipment is X series, first you should close USB to COM serve, open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, Startup Type: Manual. |
| 5. After installed the new driver, how to find out the COM port corresponding to the USB Com Port Emuation? |
| A. Open Start> all the procedures>vcomctrl>vcomctrl, you can find the number of the COM port there. |
| 6. Why QuickSet can not connect the equipment through USB after installed v1.2 driver? |
A. Confirm FAQ-1 driver has installed correctly --> Check out the number of COM port of FAQ-4 --> Confirmed equipment has been launched. Open the Quickset, select the right COM port,manual detection. If the detection failed, you can choose one of the following ways to solve the problem:
i.Check out whether swich to HID-KBW and have set Non-HID-KBW when read The Manual of Settings Code. Change and connect it again.
ii. If it connect through COM before, open "File>PC comm... > USB>OK" in Quickset, try whether it work.
iii. Close Quickset, close connection then open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, and then start it again.
Connect the equipment, open Quickset, try connection through COM.
iv. Close Quickset, close connection. Reboot the equipment, open Quickset, connect it again. |
| Applicable Accessories |
| Programming Guide |
A manual for user who can scans the pre-printed barcodes to define the configuration, By using accessories provided, scan all kinds of barcodes defined by customers. |
|
| Cradle |
STD100
|
The bracket for HR100, the HR100 could be mounted in the bracket. |
|
| Flex Cable |
| CBL100R |
This cable connect to the RS232 port of HR100 with a RJ45 port.
With a standard female RS232 port to connect to standard male RS232 port.
With a power port to accept power adapter supply. |
| CBL100U |
This cable connect to the USB Slave port of HR100 with a RJ45 port.
With a standard USB Slave port to connect to standard USB Host port. |
| CBL100P |
This cable connect to the KBW port of HR100 with a RJ45 port.With a PS/2 Host port. |
|
| Power |
| ADP50 |
The power adapter for HR100 by the CBL100R.
Output: DC 5V, 2A; Input: AC100~240V, 50~60HZ. |
|
|
